Work Better.
Cart 0
Bambu Lab X1-Carbon 3D Printer

Bambu Lab X1-Carbon 3D Printer

$1,799.00

  • Product Dimensions: 389 x 389 x 457 mm / 389 x 389 x 857 mm with AMS
  • Dual Auto Bed Leveling
  • 7 μm Lidar Resolution
  • CoreXY 20 m/s Acceleration

Bambu Lab X1: CoreXY Color 3D Printer with Lidar and AI by Bambu Lab —  Kickstarter

What's in the box

Bambu Lab X1-Carbon

Bambu Lab AMS

Build Plate(Pre-installed, Random)

Bambu Filament Samples (Random Color/Type, Contains 3 spools)

Accessories Box




X1C and X1C combo accessories in the box

NO. Physical photos Descriptions Applications Marks
1
Bambu build plate Placed on the heat bed to hold the model. Build Plate(Pre-installed、Random)
2
Hotend with hardened steel nozzle (0.4 mm)  X1C spare hotend, replace the original nozzle when it is damaged.  
3
Bambu bus cable (4PIN)  The communication cable connecting the printer and the AMS buffer For the X1C combo only
4
Bambu bus cable (6PIN)    Communication cable connecting the AMS and the AMS buffer For the X1C combo only
5
Filament cutter  Spare cutter for replacement For the X1C combo only
6
Retaining clip & hot end srcews  Spare retaining clip and hot end retaining screws, which may be needed when replacing the hot end, the ceramic heater, or the thermistor.  
7
H1.5/H2.0 hex keys  Disassembly and assembly tools  
8
Lubricant grease Special grease for lead screw  
9
Bambu scraper Print 'Scraper grip' from the built-in files, and then install the scraper to it.  
10
Spool holder It is installed on the back of the printer, fixed with 2 screws.  
11
Spare screws for the extruder Spare screws for extruder  
12
Uncloged tool for 0.4 mm nozzle Special uncloged tool for the 0.4 mm hot end  The hot end has been separated from the extruder and is heated.
13
Thermal grease

 

Improve the thermal conductivity of the thermistor、ceramic heater with the nozzle, which may be used when replacing the above accessories.

 
14
Nozzle wiper Spare nozzle wiper, replace it when the wiper is damaged.  
15
3M VHB double-side tape Use when reattaching the auxiliary part cooling fan, or when adding this fan to the X1.  

Share this Product


More from this Category